Skip to content
Red fire protection mains and sprinkler pipework beneath the exposed roof of a high-bay building

Expertise / Fire Protection

Fire Protection — Protection, built in. Confidence, throughout.

Fire protection considered together, from water supply to integrated systems testing.

Scroll to explore

The fire protection perspective

Life safety starts
with the whole picture.

Fire protection starts with the building’s use, the hazards involved and the available water supply. System selection and layout must also work with the architecture, structure, mechanical services and electrical life-safety interfaces.

Design Works provides sprinkler, standpipe and fire-pump design, specialist suppression, retrofit engineering and integrated systems testing. Hydraulic calculations, layouts and specifications establish the design, with construction reviews and testing services defined for the project.

Red fire protection mains and sprinkler pipework beneath the exposed roof of a high-bay building
Covered hotel patio at night with a round fire table and lounge seating
Fairfield TownePlace Hotel · Chilliwack, BC

Integrated protection

Coordinate the Protection Strategy

Pipe routes, pump rooms, rated penetrations and control interfaces need to work with the whole building. Our fire-protection designers coordinate with our mechanical, electrical and structural teams and the project architect. Integrated systems testing provides a further, explicitly scoped assessment of how connected systems operate together.

Featured project / Design Works scope

Mechanical, electrical, fire protection & energy modelling

A cutaway model of a ceiling space: blue ductwork, red and green pipes and yellow cable trays between steel beams

Specialist suppression

Match Suppression to the Hazard

Water-sensitive spaces, cold storage and industrial occupancies can require different protection strategies. Our scope includes dry-pipe, pre-action, clean-agent and specialist water-based systems. Selection considers the hazard, operating conditions, applicable requirements and the owner’s priorities.

A laser scanner on a tripod in an empty building interior under renovation, steel columns and tall windows

Existing buildings

Existing Building Retrofit

Retrofitting sprinkler and standpipe systems into existing buildings is its own specialty. Record drawings are incomplete, structural members aren't where the original drawings suggest, and the existing water service may not support the required flow. Our retrofit practice begins with site investigation: hydrant flow tests, existing-system pressure surveys, and structural member location. From there, we design retrofits that work within the building's actual, measured conditions, not the conditions implied by the original drawings.

Your side of the table

Different priorities.
Shared progress.

Architects & design teams

Keep the design connected.

For architects and design teams, we provide coordinated system layouts and the space and access needed for protection systems. The appointment identifies required inputs and review stages.

Developers & owners

Make informed decisions.

For developers and owners, we provide water-supply findings, system options and a defined design and testing scope. The scope is matched to the decision and project stage.

Contractors & trades

Bring the details together.

For contractors and delivery teams, we provide hydraulic calculations, layouts, specifications and construction-stage review. Responsibilities and deliverables are established with the project team.

Scope of services / 16 capabilities

Fire Protection.
In full.

The decisions, systems and specialist work behind the practice. Explore the scope, from early questions to delivery.

Core protection

Start with the essentials.

Sprinklers, standpipes, pumps and water supply form one connected protection strategy.

A model close-up where a blue duct runs through a steel beam, the clash marked by a translucent red sphere

Fully sprinklered building design

Complete sprinkler system design to NFPA 13, including hazard classification, sprinkler layouts, hydraulic calculations, and specification.

Partially sprinklered designs

Selective sprinkler protection for occupancies where full sprinklering is not required, with code-compliant documentation of protected and unprotected areas.

Sprinkler head layout and hydraulic calculation

Head spacing, area-of-application calculations, and computer-hydraulic analysis to confirm demand-versus-supply at the design point.

Standpipe system design

Class I, II, and III standpipe design to NFPA 14, with pump sizing, zone division for tall buildings, and coordination with fire-department connection locations.

Fire pump design

Electric and diesel fire-pump sizing, specification, and installation design to NFPA 20, including jockey-pump coordination and emergency-power interfaces.

Hydrant flow testing

Field flow-testing of municipal hydrants to confirm available supply and inform hydraulic design assumptions.

Fire service water-supply analysis

On-site storage, private main, and booster-pump analysis when the municipal supply is insufficient.

Specialist systems

Match the hazard.

Suppression systems selected and engineered around the occupancy, materials and operational requirements.

A newly installed mechanical plant room with insulated pipes, pumps and an air handler, a tablet showing a system diagram

Dry sprinkler system design

Dry-pipe system design for unheated spaces, including air-maintenance, trip-time analysis, and drain-and-low-point provisions.

Pre-action sprinkler systems

Single-interlock and double-interlock pre-action design for water-sensitive occupancies such as data centres, archives, and clean rooms.

Clean-agent suppression systems

Suppression-system design for water-sensitive spaces such as server rooms, electrical spaces and high-value storage, with agent selection and system requirements established for the application.

Specialty water-based systems

Water mist, foam-water, and deluge system design for specific high-challenge occupancies.

Coordination & review

Make the details work.

Retrofit planning, architectural coordination and construction review carry the strategy into the built system.

The same building as a translucent model: floor slabs, column grid, coloured ducts, pipes and cable trays inside, rooftop plant in amber

Fire-protection retrofit design

Sprinkler, standpipe, and fire-pump retrofits in existing buildings, including site investigation and remediation of legacy-system deficiencies.

Coordination with fire alarm and life-safety

Joint sprinkler-and-fire-alarm sequence design for waterflow monitoring, trouble supervision, and elevator recall, designed with the electrical team's fire-alarm engineer, not handed off in isolation.

Code-compliance review

Independent review of fire-protection designs for owners, building officials, and insurers.

Construction administration

Shop drawing review, site reviews, hydrostatic test witnessing, and AHJ inspection support through final acceptance.

Integrated systems testing

Testing of fire-protection interfaces with other connected building systems, coordinated with Electrical, with agreed procedures, participating parties, recorded results and deficiency follow-up.

In the built world

Thinking, made real.

Explore our work↗

Before the first drawing

Good questions.
Clear answers.

A starting point for the conversation about your project.

What information is needed to begin a fire-protection design?

Building use, architectural layouts, storage or process information, and available water-supply data establish the starting point. Existing buildings may also require site investigation and system records. We identify missing information before developing the hydraulic calculations, layouts and specifications included in the assignment.

Can you retrofit protection into an existing building?

Yes. We investigate the existing installation and water supply, then coordinate the proposed changes with the building layout and other services. The design considers access and the owner’s operational constraints. The scope establishes the investigations, drawings and construction-stage reviews required.

Can you test the interfaces with other life-safety systems?

Yes. Design Works provides integrated systems testing alongside its fire-protection and electrical capabilities. The testing assignment identifies the connected systems, responsibilities, procedures and records needed to assess their combined operation. Design coordination and testing are explicitly scoped so the project team understands each deliverable.

One connected practice

Fire protection is
only the beginning.

Connect suppression and alarm interfaces through Electrical and integrated systems testing, coordinate plant-room systems with Mechanical, and review existing conditions through Inspections.

For engineers & technologists

See yourself in the work?

Meet the team↗Explore careers↗

From possibility to project

What are you working on?

Share the occupancy, building layout, available water-supply information and whether the work concerns a new installation or an existing system.

Let’s talk about it